Ikelite 6910.61 200DLM/A Underwater TTL Housing for Sony Alpha A6000

975,00 

Ikelite 6910.61 200DLM/A Underwater TTL Housing for Sony Alpha A6000

zZ leider nicht mehr lieferbar

EAN: N/A SKU: IKE-6910.61 Category:

Description

Ikelite 6910.61 200DLM/A Underwater TTL Housing for Sony Alpha A6000

The Ikelite 6910.61 200DLM/A Underwater TTL Housing is a full featured and durable waterproof housing for Sony Alpha a6000 mirrorless cameras. Suitable for scuba, snorkel, surf, pool, and any application in or around the water.

The front-loading camera mounting system makes installation and removal a breeze. The camera mounting plate allows ready access to the battery and memory card, and features a standard 1/4-20 mounting point for attachment to a tripod topside.

An integrated TTL circuit is fine-tuned to the Sony Alpha a6000 flash exposure protocol for the most accurate exposure possible. The circuit is powered by the strobe for zero maintenance and no batteries to change. Exposure compensation in TTL mode is supported using the camera’s built-in control. At this time, only Ikelite DS strobes are capable of powering the circuitry. SEA&SEA, INON, and Nikonos strobes will still enjoy fast recycle times and improved battery life, but must be used in manual exposure modes only.

This housing provides a direct electrical connection to the camera’s external flash hot shoe. Cord attachment is as easy as screwing in a lightbulb, and the threaded fit prevents accidental detachment during use. The bulkhead connection has been moved to the top of the housing to keep cords out of your way and reduce strain on the cord ends. A variety of sync cord terminations are available for Ikelite, SEA&SEA, INON, or Nikonos strobes for ultimate versatility.

The camera’s built-in flash is suitable for firing an external strobe, but not for lighting a photo underwater. Two fiber optic ports are built into the front of the housing provide an attachment point for fiber optic cords from most major manufacturers. Use of a fiber optic connector requires the camera’s built-in flash to fire, reducing battery life and bypassing the TTL functionality of the housing.

This housing accepts a variety of ports to accommodate all of the most popular zoom, macro, and wide angle lenses. The custom optical grade acrylic domes components provide the color, clarity, and durability of glass at a fraction of the travel weight and cost.

This housing requires the addition of a compatible DLM Lens Port for waterproof operation. Lens Port not included.

The new ABS-PC blend provides strength and corrosion free performance year with minimal maintenance. The specially formulated color deflects the sun to keep your camera running cooler, longer. Compared to black or clear housings, the light gray color provides superior contrast for enhanced view of the camera, LCD screen, and o-ring seal.

In the Box: Housing, Rear o-ring # 0110 (installed), Front o-ring # 0132.36 (installed), Waterproof bulkhead cap # 9104.7 (installed), Silicone lubricant 1cc tube

Specifications:

  • 200 ft (60m) depth rating
  • Compatible with DLM system lens ports
  • Controls for all important camera functions
  • Ikelite flash bulkhead connector with built-in TTL circuitry
  • Two 1/4-20 threaded tray mounts with 3-inch (76mm) spacing
  • Ikelite bulkhead connector with built-in TTL circuitry
  • Slightly negative buoyancy in fresh water
  • Actual buoyancy varies depending on choice of lens and port
  • weight 3.1 lb (1430 g)
  • dimensions 6.3 x 7.5 x 5.2″ (160 x 191 x 132 mm)
  • ABS-PC, acrylic, and acetyl construction

Compatibility: The Sony a6000 and a6300 cameras are very similar in size and configuration. Unfortunately, differences in lens placement prevent the cameras from being used interchangeably in the same housing.

Additional information

Weight 2,2 kg
Dimensions 24,8 × 16,5 × 16,5 cm
Hergestellt in:

USA

Tauchtiefe

60m / 200ft

You may also like…